Solar energy for Haryana’s growing electricity demand

India, Haryana

ClimatePartner ID: 1778

Project details

In the field

Project impact

Project facts

Quality criteria

Solar energyGet to know the project

India’s electricity grid continues to rely heavily on fossil fuel-based power plants. As a result, electricity generation causes substantial CO₂ emissions. Expanding renewable energy helps meet electricity demand with solar power and reduce dependence on fossil fuels.

This is where the solar project in the village of Khanak, in Bhiwani district in the northern Indian state of Haryana, comes in. The plant has a capacity of 50 MW_AC and 75 MW_DC.

The solar power generated is fed into the Indian electricity grid via a substation. It replaces electricity that, without the project, would have been generated predominantly by fossil fuel-based power plants.

The project’s climate impact comes from replacing this fossil fuel-based grid electricity. The solar project is estimated to avoid approximately 103,395 tonnes of CO₂ per year on average.

The verified results confirm the project’s electricity generation: from 23 November 2021 to 31 May 2025, the solar project fed a total of 371,187 MWh of electricity into the grid.

In addition to its climate impact, the project creates jobs at the plant site. Employees are responsible for operating and maintaining the solar plant. In 2025, three people were employed on a permanent basis and 57 people on temporary contracts.

103,395 t CO₂Estimated annual emissions reductions

Project Standard

The project contributes to the the United Nations' Sustainable Development Goals

How does solar energy contribute to climate action?

Although the development of renewable energy sources is increasing, energy from fossil fuels is still a significant part of energy production worldwide. This is associated with the release of large amounts of carbon emissions. The use of solar energy is a good way to provide people around the world with renewable energy and reduce greenhouse gas emissions. Solar installations, implemented through solar projects, convert sunlight into electricity (photovoltaic) or heat (solar thermal). Even when the sky is cloudy, the solar thermal power plants generate heat and convert it into electricity. Photovoltaic projects use the photoelectric effect to convert sunlight into electricity.

The energy produced is typically fed into the national or regional power grid, reducing the share of fossil fuels in the electricity mix. In addition to reducing carbon emissions, solar projects also prevent the release of various pollutants associated with conventional power generation. Solar energy projects in the ClimatePartner portfolio are registered with international standards.

The project aims to contribute to these United Nations’ Sustainable Development Goals (SDGs).

Project facts

Climate projects generally fall into one of three groups: carbon reduction, carbon removal, or carbon avoidance. Carbon reduction projects reduce the amount of greenhouse gas emissions produced by a specific activity (e.g., improved cookstoves). Carbon removal projects remove carbon from the atmosphere by sequestering it in carbon sinks (e.g., reforestation). Carbon avoidance projects avoid greenhouse gas emissions entering the atmosphere (e.g., protecting forests from deforestation with REDD+ projects).

All climate projects are based on international standards. They set processes and requirements which carbon projects must fulfill to be recognised as a proven method of reducing carbon emissions.

Climate projects demonstrably reduce, remove, or avoid greenhouse gas emissions. This is achieved with various technologies, ranging from nature-based solutions to social impact projects and renewable energies.

Most standards on the voluntary carbon market list their projects in public registries. The registries are used to store project data and track issuances and retirements of verified emission reductions. The registry ID can be used to identify projects in the standard registry.

Check out this project

Climate projects go through third-party validation and verification. Verification happens regularly after each monitoring period. A validation and verification body checks and assesses whether the values and project activities stated in the monitoring report are correct and verifies them. As with validation, visits to the project site are often part of the process.

Climate projects go through third-party validation and verification. Validation happens early in the project life cycle and ensures that the project design is in line with current processes and requirements. This phase often also involves field visits with on-site interviews and analyses. Auditors are accredited, impartial assessors who have to be approved as a validation and verification body (VVB) by the standards body.

This figure shows the estimated annual emission reductions calculated before the project started. The actual number of emissions saved in each monitoring period may differ. The background to this process is that in order to be registered as a climate project, the project operator must submit the calculation of the estimated emissions savings using the ex-ante methodology in a Project Design Document (PDD), which is similar to a business plan. This calculation is validated by an independent auditor. The values determined in the PDD are recalculated during regular monitoring periods based on actual project performance, documented in a monitoring report, and verified again by independent auditors at the end of the monitoring period to ensure a robust process. Independent verification thus provides ex-post verification of actual emission reductions. Verified emission reductions are not distributed until the savings have actually been made.

Four criteria for projects to meet quality thresholds

01. AdditionalityA project must lead to lower carbon emissions than would have occured without the project. Additionality also means that a project relies on financing from the sale of emission reductions, as the project would otherwise not be feasible and the upfront investment would be too high for project developers.

02. Exclusion of double countingThe carbon reduction may only be counted once and may not be counted again elsewhere, so a Verified Emission Reduction is retired once it has been used. This process is recorded in official registries.

03. PermanenceThe criterion of permanence ensures that carbon reductions or removals are ongoing and do not occur just once. This guarantees a long-term benefit for the climate. The minimum duration of a project depends on the underlying project technology.

04. Audit by independent third-partiesClimate projects must be audited regularly by independent auditors such as TÜV Nord. These auditors verify that the project is in compliance with the relevant standards. They also determine the volume of carbon emissions that have actually been avoided or removed.

The life cycle of a climate project

A climate project has a set life cycle consisting of various phases, from the feasibility assessment to the retirement of Verified Emission Reductions (VERs).

Project planning phase

The project developer reviews the general feasibility of the project, the project design, and the financing. Then, the Project Design Document (PDD) is prepared, which contains all the basic information about the project, such as the objective, location, timeline, and duration.

Validation

In this phase, independent auditors examine the PDD and the information it contains. This phase often also involves field visits with on-side interviews and analyses. Auditors are accredited, impartial assessors who have to be approved by the relevant standard as a validation and verification body (VVB). TÜV Nord/Süd, S&A Carbon LLC., and SCS Global Services are examples of VVBs."

Registration

Once validated, the project can be registered with a standard such as the Verified Carbon Standard or the Gold Standard. All high-quality climate projects are based on international standards. They provide the framework for project design, construction, carbon accounting, and monitoring. Recognised standards make the climate project system and the projects themselves resilient, traceable, and credible.

Monitoring

After the climate project has been registered, the monitoring begins. Here, the project developers monitor and document the data of the project activities and progress. The duration of the monitoring phase varies from project to project: it can cover two years, but documentation over five or seven years is also possible.

Verification

At the end of each monitoring phase, a VVB checks and assesses whether the values and project activities stated in the monitoring report are correct. As with validation, visits to the project site are often part of the verification process.

Issuance of Verified Emission Reductions

Once verified, the emission reductions that were confirmed in the verification phase can be issued as VERs. The steps of monitoring, verification, and issuance of VERs are repeated regularly and are therefore considered as a cycle.

Retirement of Verified Emission Reductions

Once a VER has been used, it must be retired. This process is also reflected in the registry. If the financing of a climate project is done through ClimatePartner, the VERs are bundled in a system certified by TÜV Austria and then retired on a regular basis. This ensures that each VER can no longer be sold and is only used once, preventing double counting.

* For certified projects only: the project-related information on this page is based on the documents in the register.

Explore our projects